Los Angles Abrasion Testing Machine

(AIM-456)

 BIS : 10070:1982

Los Angles Abrasion test is generally carried out for judging the desirable properties of aggregates hardness or resistance to abrasion. stance to abrasion.

Compressive Strength Machine (Digital)

(AIM-317E-DG-C-6)

 IS-4031 (Part-6) 1988 (R-2005)

 Maximum stress a material can sustain under crush loading. The compressive strength of a material that fails by shattering fracture can be defined within fairly narrow limits as an independent property. However, the compressive strength of materials that do not shatter in compression must be defined as the amount of stress required o distort the material an arbitrary amount. Compressive strength is calculated by dividing the maximum load by the original cross-sectional area of a specimen in a compression test.

Vicat Needle Appratus

(AIM-512-1)

IS-4031 (Part-5) 1988 (R-2005)

The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mould, split type and glass base plate and one set of needles one each initial needle, final needle and consistency plunger.

Marshall Stability testing Machine

(AIM-550)

ASTM:D-1559

 Marshall Stability Test Apparatus Stability Test of Cylindrical specimen of bituminous paving mixture is the most frequently used by highway departments, contractors, engineers and testing laboratories

CBR Digital Testing Machine

AIM-121

 IS-2720 (Part-16)1987 Reaffirmed (2002)

This equipment helps in conducting the CBR test in laboratory. This test is used for determining the relative bearing ratio & expansion characteristics of soil required for the design of roads, pavements & runways.

Permeability Testing Apparatus

AIM-13111

 IS-2720 (Part-40) I

t is a laboratory model used for testing soil with coefficient of permeability in the range of 10-3 to 10-7 cm/sec and maximum particle size of 10mm.

Ring & Ball Apparatus

AIM-036-1

IS-1205-1978

It is used for determining the temperature at which a sample of bituminous material loaded by a 9.5 mm dia steel ball,drops a specified distance when heated under specified conditions.

Bitumen Extractor Machine

AIM-563-1

 SP-11-1976

We present analog control model with analog controller in base. 1500g capacity, 220V, 50Hz. These are manufactured out of superior quality raw material and this is why it has high resistance in the extreme conditions. These are qualitative and cost effective at the same time.

Impact Testing Machine

AIM-456

BIS-5640-1970

It is for determining the aggregate impact value and has been designed in accordance with IS: 2386 (Part 4) IS: 9377

Atterburg Limitv Test Appratus

AIM-040

IS-2720(part-1)Reaffirmed(2006)

The objective of the Atterberg limits test is to obtain basic index information about the soil used to estimate strength and settlement characteristics. It is the primary form of classification for cohesive soils.

Specific Gravity By Pycnometer

AIM-561-1

IS-1202-1978

The specific gravity of an aggregate is considered to be a measure of strength or quality of the material. Stones having low specific gravity are generally wearker than those with higher specific gravity values. The specific gravity test helps in identification of stone. the specific gravity value of aggregates are made use of for making weight-volume conversions and for calculating the void content in compacted bituminous mixes.

Sieves

The analysis of soil by particle size provides a useful engineering classifciation system from which a considerable amount of empirical dat can be obtained AIMIL supplies both in GI and Brass Frames of 20cm, 30 & 45 Cm diameters.

Viscometer

AIM-528

IS-:73-1992

A rotary viscometer includes a rotor member having plural helically staggered mixing blades disposed on the outer surface thereof for thoroughly mixing a quantity of fluid whose viscosity is being measuring during rotation of the rotor member. The viscometer has a relatively large annular space between the rotor member and a stationary bob member, and the viscosity of hydraulic fracturing fluids for earth formations, in particular, of a type which exhibit increased viscosity at elevated temperatures, is measured by an improved method using the viscometer.

Electronic Oven

Classic Scientific is the one name you can trust upon for the manufacturing of Laboratory Ovens that are designed to meet the various I.S. & A.S.T.M. standards. The increasing demand of our offered Laboratory Ovens has helped us to design them in the most ravishing way to meet the different application in the growing field of Medical, Agricultural, Industrial, Research laboratories, & Hospitals. For that, we are stated as the most trusted manufacturer and supplier of Laboratory Ovens. Medical, Agricultural, Industrial, Research laboratories, & Hospitals. For that, we are stated as the most trusted manufacturer and supplier of Laboratory Ovens.

CBR Mould

CBR Moulds are made from Gun Metal / Brass and are available with perforated base plate and extension collor.

Cube Mortar Appratus

AIM-9933

 IS-4031 (Part-6)

Sand Replacement Apparatus

AIM-162

 IS-2720 (Part-28)

 A belt sander includes a main frame, a drive roller, a driven roller, a sand belt, and a sand belt replacement apparatus. Thus, the user only needs to rotate the control handle to move the driven roller relative to the drive roller so as to change the distance between the drive roller and the driven roller so that the user can adjust the tension of the sand belt easily and rapidly, thereby facilitating the user adjusting the tension of the sand belt, and thereby facilitating the user mounting and replacing the sand belt.

Ductility Testing Machine

AIM-565

 IS-1208-1978

Bituminous surfaces exposed to varying temperature conditions undergo expansion & contraction. So an important characteristic of the binder is its ductility & the degree of ductility has an effect on the cracking bituminous surface due to traffic stress.